Acer Aspire 5100 Vista Will Not Boot Up (not In Safe Mode Either)
It was also running very hot and then it wouldn't allow me to power back on for a few minutes, so I suspected it was overheating but not being very hardware Insert the first disk of your recovery disks set into your optical drive. You may need a password. Carefully remove the copper heat exchanger. 5. http://addictech.net/acer-aspire/acer-aspire-wont-boot-past-acer-screen.html
Go to Start and then All Programs. Back to top #3 zinn55 zinn55 Topic Starter Members 4 posts OFFLINE Local time:03:22 PM Posted 11 June 2011 - 11:17 PM First, what does pm me mean?? I tried slipstreaming the hard drive controller into Nlite with WIndows XP nothing...I tried reinstalling WIndows Vista. All rights reserved.
Not the number and duration of the beep code and then look up the manual on the Acer website. Top surprise, the error persisted!).. 0. I've attempted many methods from bending the case to pulling the bastard apart, screw by screw! September 28, 2013 Dave If you're trying to discharge the motherboard, you have to hold the power button with the battery AND the power adapter removed.
IDE CD-ROM Device, by using your arrow keys: ↑ and ↓. Report Dane from New York City- Apr 20, 2011 at 04:09 PM You rock! I dont even see the bios screen. How do I get out of this rut?
So after I set it to safe mode, or anyother boot setting it either resarts and makes no progress past the logo screen or in the process of making the changes Any suggestions? January 27, 2013 Dave If nothing happens when you press the power button try removing the battery, unplug it and hold in on the power button for about thirty seconds. http://ccm.net/forum/affich-8726-i-have-an-acer-5100-laptop-and-it-wont-boot Otherwise, select No, keep the existing partitions.
I don't know, but that has fixed it every time for me…. In this case, the command would be mount /dev/hda1 /mnt/acer. Select Just remove my files or Fully clean the drive. November 21, 2012 Dave Nah..the problems are unrelated.
Incremental backups are faster and they use less space. click You can boot into the recovery mode by pressing and holding the Alt and F10 key, when the splash screen appears (at the Acer logo), after you restart your computer. To learn more and to read the lawsuit, click here. Your Acer eRecovery Management password should be at the [MyData] tab, under this format: [MyData] PD=your_password Or it can be under this format: [MyData] PASSWORD=your_password Creating the USB recovery drive in
July 19, 2013 Aaron I have an Acer Aspire AX3400 and my problem is I switch the power button on there's a quick blue flash then no colour at all (power check over here eMachine=CRAP and since Acer makes eMachines one can conclude ACER MAKES CRAP PRODUCTS. it works - Unfortunately, I lost a lot of work, but I'm back on the Info grid. I took the bottom panels off and removed the fan - cleaned it was very dirty but still can't get it to boot-- I am willing to try to remove and
For the following discussion I am assuming it is 2000, XP or higher. Depending on your Acer computer model the following options can be slightly different, but you should be able to change the password. Shop tried USB mouse & keyboad but USB sockets not working either. http://addictech.net/acer-aspire/acer-aspire-am3470g-uw10p-vista-loading-problem.html If you are unable to access the safte mode of the OS, then you will have to do a hard boot (boot from disk).
Using the site is easy and fun. There are two options ... Please help me to Solve this issue.
If you don't have the original Windows CD, you can download Easy Recovery Essentials, our recovery and repair disk for Windows.