How To Connect Ide Hard Drive To Sata Motherboard
This second drive will only have data. All IDE hard drives have the same standard socket types and the IDE cable should have an alignment notch to ensure it is inserted the right way (see fig 1.2), likewise, He spends an absurd amount of time in the VR room and tinkering with DIY home automation systems. This article discusses the options. http://addictech.net/hard-drive/how-to-connect-two-sata-hard-disk-in-one-pc.html
I have still been unable to recover the lost data, using recovery programs, etc., I think the info is still there, but I'm not going to pay a high price to I'm using 3 maxtor HD's 80 & 120 gb sata + 200 gb pata, and 3 dvd burners BENQ 1625, & 1610, + LG GSA 4163B. by nelchael_com / November 22, 2006 5:48 AM PST In reply to: Same problem here... __[ In English, resume/summary ]______________________I get a HD SATA and want turn it the Primary Boot Sata is primary drive and it was automatically set to drive H. https://www.cnet.com/forums/discussions/mixing-sata-and-ide-drives-in-a-system-115142/
How To Connect Ide Hard Drive To Sata Motherboard
It's also a good idea to touch the power supply before you go sticking your hands in there! I would like to connect the old IDE hard drive to that compute and basically browse through the file system, grab the files, and copy them to my existing computer. If you want to do that you'll just have to make sure that it's plugged into the right part of the cable.
If you are replacing a drive then it can be installed in the same drive bay as the old one. Well, looking at the back of the device, we have 3 pairs of pins. Computing.Net cannot verify the validity of the statements made on this site. Motherboard With Ide And Sata Ports Partition the drive.
Andrew SME 68.517 görüntüleme 5:02 How to connect SATA devices in a PATA (IDE) only PC system - Süre: 2:33. How Many Hard Drives Can Be Connected To A Single Ide Cable You should be able to remove a jumper with your finger nails, if not then use a pair of very small needle nose pliers and don’t bend the pins. Yükleniyor... Çalışıyor... Previous PostHow To Install A New Hard Drive To Replace An Old OneNext Post3 DIY Computer Repairs You Can Easily Do Yourself 10 comments Write a Comment Chris Balfoort August 31,
Ide Hard Drive Jumper Settings
Because Windows, and system, detect HD SATA and primary IDE HD in ID 0 Bus 0 ATAPI, i move my IDE HDs to secondary IDE Channel e move my DVD/CDROM to
This allows the cable to select if the drive is master or slave based on the position on the cable. How To Connect Ide Hard Drive To Sata Motherboard I have a sata HD running as my main drive and another IDE HD, formerly my main one, that I use for music files and backup storage. Sata And Ide Hard Drives Together If not, email their support.
If that does not work, there may be something wrong with the drive. this content You'll see some kind of diagram that looks like this: It's not currently set, but you can fairly easily tell from the diagram what you'll need to set it for. The cable labelled B in fig 1.6 is the SATA power cable, this is the standard power cable available on most modern PSUs (power supply units). i dont understand this as my dvd drive is working fine thrue the ide cable and when i unplug my dvd and stick my hard drive nothing ...and i dont have Ide And Sata Drives In Same Computer
Many products just cost a few dollars. I've used Syba's IDE/SATA Converter. Select New Partition. weblink CoolDudeClem 2.974 görüntüleme 6:05 SATA OR IDE To USB adaptor - Süre: 8:39.
share|improve this answer answered Feb 26 '10 at 17:18 NoCarrier 2,45842945 add a comment| up vote 3 down vote Is the drive detected in the BIOS?
ACS Data Recovery 877.557 görüntüleme 18:28 Clicking hard drive dis-assembly. Flag Permalink This was helpful (1) Collapse - It's all about the controllers by DJPython / July 22, 2005 5:53 AM PDT In reply to: Mixing SATA and IDE drives in Flag Permalink This was helpful (0) Collapse - Same problem here... How To Connect Ide Hard Drive To Motherboard Note: You wouldn’t normally run devices outside of the case like this, but for the purposes of checking if they work, it’s a lot easier than unscrewing them and poking around
Further to my post above...My only guess is the IDE-to-SATA adapters attached to the IDE hard drives are junk. by Mad53704 / December 4, 2006 12:48 PM PST In reply to: New SATA HD booting mantining old IDE HDs. There are a few additional considerations to take into account if you are running multiple SATA drives in a RAID array (like making sure all OS's are installed with RAID drivers) check over here Nothing showed in Windows XP at all-didn't show up in disk management either.
I have two SATA drives as my main drives, and I have two IDE drives (one refuses to operate), so I installed the one IDE drive into my system, and have share|improve this answer edited Aug 6 '12 at 18:36 slhck 129k38336372 answered Aug 6 '12 at 18:19 ferandreassi 111 add a comment| Your Answer draft saved draft discarded Sign up